Specifications

Drive system
Digital control servo motor

Cutting mechanism
Media-moving method

Acceptable material size
Width: 50 – 700 mm (1.97 in. – 27.5 in.)

Length
Roll material: no restriction
Flat material: 100 mm (3.94 in.) or more

Maximum cutting area
584 mm (Width) × 25,000 mm (Length) (22.9 in. × 984 in.)

Usable tools
– CAMM-1 series blade (ZEC-U5032 / U5022 / U5025 / U3017)
– Flat Bed blade (ZEC-U1715 / U3050 / U3075 / U3100)
– Window film blade（ZEC-U5010)

Cutting speed
10 – 850 mm/s (0.39 – 33.4 in./s)

Blade force
30 – 500 gf

Mechanical resolution
0.0125 mm/step (0.49 mil./step)

Software resolution
0.025 mm/step (0.98 mil./step)

Distance accuracy *1
Error of less than ±0.2% of distance traveled or 0.1 mm (3.94 mil.), whichever is greater

Repeatability *1, *2
0.1 mm (3.9 mil) or less

Alignment accuracy for cutting printed material *1, *3
±1 mm (±39.4 mil.) or less for movement distance of 210 mm (8.3 in.) or less in material-feed direction and movement distance of 170 mm (6.7 in.) or less in width direction (Does not take influence of printer and material into account)

Connectivity
– Ethernet (automatic switching between 10BASE-T and 100BASE-TX)
– USB 2.0 (FULL SPEED compliant)

Replot memory
2 MB (buffer size: 8 MB)

Command system
CAMM-GLⅢ

Power supply
Dedicated AC adapterInput: 100 – 240 Vac, 50/60 HzOutput: 24 Vdc 2.7 A

Rated current
1.0 A

Power consumption
Approx. 24 W

Acoustic noise level
During operation: 70 dB (A) or less

During standby
40 dB (A) or less

Outer dimensions
860 mm (Width) × 319 mm (Depth) × 235 mm (Height) (33.9 in. × 12.6 in. × 9.3 in.)

Weight
13.5 kg (30 lb.)

Environment
Temperature: 5 – 40 °C (41 to 104 °F)

Humidity
20 – 80 % RH (no condensation)

Included items
Power cord, AC adapter, Blade, Blade holder, Roller base, USB cable, Alignment tool, Manuals

*1   According to material and cutting conditions as specified by Roland DG Corporation.
*2 – Excluding expansion/contraction of the media
– Length in sheet feed direction: Within 1600 mm (62.9 in.)
*3   According to measurement standards as specified by Roland DG Corporation.
– Software must be included Roland DG Corporation software.
– Assumes use of a laser or inkjet printer with a resolution of 720 dpi or greater.
– Excludes glossy and/or laminated material.
– Excludes effects of warped printing due to accuracy of printer or effects of expansion/contraction of material.
– May not be read correctly by the sensor depending on the printer ink (black) used.