The REV 2C Electric Heat Press produced by Transmatic is characterized by the very high quality of construction.
Electric heat presses represent the alternative to pneumatic presses.
Electric heat presses are a peculiar product of Transmatic and allow:
– high pressures
– control and repetitiveness of the chosen pressure
– automatic closing and opening
It does not require a compressor or a compressed air system. It is therefore a suitable heat press for point of sale, where the noise and vibrations of a compressor can cause problems.
It is equipped with digital electronic regulation of time, temperature and pressure with fault indicator via touch screen.
The bottom plate is interchangeable with the optional cap printing accessory. It is equipped with a piece counter, nomex cover.
The 2C model is equipped with side button closure / automatic opening
Technical features
– Electronic and digital regulation of time and temperature via touchscreen
– Automatic fault detection system
– Setting and storing of 4 presets
– Daily and total piece counts
– Nomex blue
Technical data
Plate size: 50 ร 40 cm
Power supply voltage: 230 V single-phase
Maximum power: KW 2,2
Consumption: KW / H 1.0
Temperature: 50-255 ยฐ C
Adjustable time: 0-999.9 sec.
Pressure: 600 gr / cm2
Net weight: 85/96 Kg
The Transmatic heat presses.
Transmatic is an Italian company, a world leader, which designs and manufactures heat presses of any size entirely in Italy, from small laboratories to industry.
All Transmatic heat presses are characterized by a plate of high thickness and consequent weight; this means total non-deformability of the plate, long life and uniform pressure on the entire heated surface.