The REV 3S Transmatic Electric Heat Press is a Side Opening Heat Press that does not require a compressor or compressed air.

This line of Electric Heat Presses produced by Transmatic represent the alternative to pneumatic presses, especially suitable for points of sale or places where it is necessary to lower the noise of the machinery.

Transmatic Electric Heat Presses are designed and produced in Italy.
– allow high pressure
– allow control and repeatability of the chosen pressure
– automatic side opening and closing

This type of electric heat press does not require a compressor or a compressed air system for operation. It is therefore particularly suitable for places where it is not possible – or not convenient – to produce noise.

This heat press is equipped with digital electronic regulation of time, temperature and pressure with fault indicator via touch screen.

The bottom plate is interchangeable with the optional cap printing accessory. It is equipped with a piece counter, nomex cover.

The 3S Model: Closing by side buttons / automatic side opening

Technical features
– Electronic and digital regulation of time and temperature via touchscreen
– Automatic fault detection system
– Setting and storing of 4 presets
– Daily and total piece counts
– Nomex blue

Technical data.
Plate size: 50 × 40 cm
Power supply voltage: 230 V single-phase
Maximum power: KW 2,2
Consumption: 1.0 Kw / h
Temperature: 40 ° -255 ° C
Adjustable time: 999.9 sec.
Pressure: 600 gr / cm2
Net weight: 77/88 Kg

What are Transmatic heat presses.

Transmatic is an Italian company world leader in the production of heat presses for any use, from small laboratories to industry.

All Transmatic heat presses are characterized by a very thick plate, whose weight guarantees total non-deformability of the plate, long life and uniform pressure on the entire heated surface.