• Choose the language / country

Shopping Cart

€0.00

My Cart -

Categories
HINGE CLAMPS FOR SCREEN PRINTING (PRICE FOR TWO)

HINGE CLAMPS FOR SCREEN PRINTING (PRICE FOR TWO)

Code: 2543

In Stock: 20


The clamps screw to the table to enable precise adjustment of the screen's movement.

 

They are not compatible with SC1 profile frames.

Excl. Tax: €12.50 Incl. Tax: €14.88
Qty:

Questions about the product?
Check out our answers to frequently asked questions

The simplest and cheapest way to create a manual screen printing press!

How the clamps work:
They screw to a simple wooden table and the clamps hold the screen in place, this is the simplest way to precisely adjust the movement of the screen whilst printing. 
The clamps come complete with the screws. 

Suitable for frames with a rectangular or square section of any thickness. 

The frame can be held in place with a wing screw.

 

They are not compatible with SC1 profile frames.

 YOU CAN USE THE CLAMPS TO PRINT ON T-SHIRTS OR SHOPPING BAGS.




YOU CAN USE THE CLAMPS TO PRINT ON PAPER.

materiale serigrafia

Domande sul prodotto

Questions on HINGE CLAMPS FOR SCREEN PRINTING (PRICE FOR TWO)
Sort by Descending
(1)
  • Question di Daniel, il 8/2/2021 2:32 PM
    • Do these clamps ensure there's no gap left when they're attached directly to the press or is it necessary to add spacers?
    • Due to the thickness of the metal frame, on the clamp side the frame lifts from the printing station by 5 mm.


      Depending on the thickness of the item you are printing on, and the dimension of the frame, two spacers would need to be placed under the frame on the operator's side.


      Using adhesive tape, cardboard spacers are usually placed on the lower side of the screenprinting frame.
Ask Your Own Question




PINZE A CERNIERA PER TELAIO SERIGRAFICO (PREZZO A COPPIA)
Voto 5.0/ 5
Hanno funzionato perfettamente per il momento! facilissime da montare