This micro-adjustment clamp is an accessory for the Silver 1.4 Spider and Silver Start Up bench.
The micro-adjustment pliers allow you to adjust the colours following the first one by micro-moving the frame before starting the print.
The micro-adjustment gripper makes it easy to register colours.
This accessory can be easily substituted for the standard grippers on the Silver 1.4 Spider.
By operating the knobs on the clamp we can move and rotate the frame on the two axes.
Using the knobs the frame can move about 10 mm on each axis.
In this way it is no longer necessary to loosen the knobs that lock the frame and move it by trial and error, as we are forced to do with standard clamps.
When the register marks, engraved on the frame, match those on the printing table, we stop the frame in the correct position by means of the two locking knobs.
The Silver 1.4 Spider is the only low-cost carousel on the market on which this accessory can be mounted.
The micro-adjustment clamp is a device that is normally available on rides of a higher range.
No tools are required to replace the clamp: simply loosen two knobs.
Three micro-adjustment grippers are sufficient to improve the functionality of the Silver 1.4 Spider: for the first colour, which does not require adjustment, we can use the standard gripper normally supplied with equal effectiveness.